Initially this ski was just replace impeller as impeller was damaged and too much gap.
Disconected pump assy. 
Water was sitting inside of bearing room as needs replace bearings and seals.
Impeller was bent and worn too much. Most case it can repair but this customer want to replace to SOLAS impeller.
Unfortunately impeller housing was damaged and won't fit brand new impeller. 
So in the end replace all parts of jet pump unit except impeller shaft.
Brand new! looks good.
The first tea of the season is picked from the end of April to the end of May. My friend send this for me every year. My home town Shizuoka Prefecture is famous place of Green tea product in Japan. 
Green tea is graded into three categories depending on the quality of the leaf; refined, medium and coarse.
Taste very nice.
Looks not so good to me,,,,,,
Reomved carbys but fitting two bolt were damaged by rust and it was so hard to unscrew that. I spend 1.5hr for just removed carbys.
Inside of carby was rusty. Oh boy!
Pilot adjust screw was stuck,,,,, Oh my god!
Hi speed adjust screw was stuck too,,,,,Shit!
However all parts are cleand and ready to dassemble. Carby job is take a much time to do it mate,,,,,, pain in the ass
This VX700 is same hull as VX110 just different motor. This ski was Life guard's ski but now new owner he use this for tow in surfing.
700cc 2 stroke motor.
Water was sitting bottom of fuel filter.
Just little water but we drained all fuel from tank then found more water about 100cc.
Extra fitted bilge didn't work.
Fuse was damaged by corrosion becasue fuse box(after market) was non water proof.
Lead joint were damaged by corrosion too. With this of course bilge doesn't work!
New taist and more power!
Also new style re-sealable tap is so cool. so this is close.
This is open. 
Nitro Beast,,,,,,
Wait in a queue.
A part of menu, 
My favorite ! Mos Cheese burger. Beef patty, cheese, onions, special sauce and a sliced tomato. It's yummy.
Teriyaki burger is famous Japanese taste burger.
This GP1200 came to shop for service. Then found water sitting in fuel filter. Also about 200cc of water was sitting in fuel tank.
Inspected where water get into fuel tank and I found pressure leak from top of fuel sender as bubbles come out. This top of fuel sender has indentation because if water sitting on top that through gap into fuel tank. Also this pressure leak from fuel tank may occur to fuel leak and in worst case it will have a chance to explode jet ski. 
Dismantled fuel sender. Hose fitting was damaged by corrsion 1of 4.
Base of sender had few cracks as need to replace.This ski used over 300hr and 12years old, it was due to replace.
Replaced fuel sender assy as improved type of top.
Make sure where water leak from.
Water leaked from pump duct housing.
Water was through to tube of drive shaft. 
Lift motor out and remove bearing housing and drive shaft.
Pump duct housing seal getting came off and water leak from there. It was easy to remove pump duct housing.
Super Jet 2008 model
Throttle cable was kinked and won't close thorottle quickly. Cable end (blue circle)was seized and won't turn, this was cause of kinked cable.
Inspected and lube steering turn plate busing.
Fuel filter was due to replace
Impeller conditon was good.
Inspected inside of electric box. A little of water was sitting inside.
Fuse cap seal of electric box was due to replace.
