Yamaha FX-140 exhaust problem, 2

Disconnect exhaust joint hose assy.

Damaged rubber hose. Exhaust gas and water blow out from here.

Remove outer housing. There are built up corrosion in between housing to rubber hose.

New rubber hose.

This engine mount just sitting under the joint hose because get salt erosion and peel off rubber by salt water as oil filter which blow out from joint hose.

Oil filter sitting  front of engine mount.

Yamaha FX-140 exhaust problem

We found why oil filter been rust because exhaust joint hose been split.

This exhaust joint hose sitting between end of exhaust pipe to water box.

In short exhaust gas and water blow out from here and get rust around

parts which inc oil filter.

What's this?

It looks like a unexploded bomb !

This is after market oil filter fit to Yamaha 4 stroke ski.

 Is this just bad look after or because non genuine parts?

Customer said been serviced not long ago at other shop.

Anyway better to rins inside of engine room anytime after you ride.

Japanese Jet ski magazine Apr issue

This month they pick up Free ride  Australian Open topics that opened last Feb.

STX1100 water leak problem

This Kawasaki STX1100 happend over heat problem.

This problem cause from cooling hose joint between jet pump to engine room.

 Cooling water pick up from jet pump and through this tube then send to engine,

however this case the plastic joint tube been split and water leaked from there. 

In short this is cause of this motor get over heat.

This plastic tube will split after long time past but this parts can`t get from Kawasaki, I don't know why

 because we made this parts by alumimum so now no warries!!

Slant-detection swtich

Switch place inside of EL box of FX-HO

This position is normal as open circuit (switch OFF)

This position is when ski rollover as close circuit (switch ON)

Do you know 4stroke jet ski has slant-detection switch?

This switch work for stop engine immediately when ski rollover

becasue if engine keep running then oil pump suck air and

may cause of engine damage also avoid to water get into

engine room so quickly.

Service and inspection of Yamaha FX-HO , 3

Full inspection program we check inside of electric box and lead couplers.

Jet skis electric box and lead coupler are basically designed water proof for

avoid damage electric parts and lead joints.　However if packing and seals are getting

damage or wear  that may cause of leak water and damage electric parts.

If any leads even just one lead get corrde that cause of engine trouble such as

won't turn starter motor,won't spark, lost power. Everybody know modern jet ski use

 now computer management Fuel injection sys. This sys controled by many sensor fitted around

motor. Those sensor pick up temp, pressure, throttle open angle, crank shaft angle etc,,,

then send those info to ECU (main PC). In short even if one sensor's lead are corrode or damage

then ECU can't get true info and lost control motor, worst case stop motor or get poor performance.

We recommend check this regularly for avoid trouble your jet ski.

Service and inspection of Yamaha FX-HO, 2

inspect spark condition, must need good and strong spark.

                       inspect throttle body and cable, must synchronize all valves,  moving smooth, no corrosion .

inspect drive-train coupling, check coupling and rubber coupling, must need suitable gap between coupling to coupling.

Service and inspection of Yamaha FX-HO

Ignition coil (spark plug cap) been rust 2 of 4.　Both  removed rust and clean also all 4 of coils sealed by Sika-flex as show VX110's  last week.

Electric wiring coupler trouble

This customer's GP1300R had trouble of wiring coupler.

This ski been fitted RIVA fuel control sys. This sys just connect between main harness coupler and control fuel volume of injector for modified motor.  However water get into inside of coupler and damaged terminals because ski didn't run well. 

I want this !

Gday mate!

One of job was today Yamaha SHO service. This customer show me a nice cam which GoPro.

This is little cam with water proof housing and you can put this anywhere on jet ski by suction disc.

So you can film on-board video picture. May be good for me check something engine room when check problem on a water. Check this Web http://www.goprocamera.com/

Over heat sensor

G day mate!  Doctor was very busy this week and one more day before weekend. This week patients  were 2 of FX-140,VX110, GP1200, GP1300R, STX15F.
Today's topics is over heat sensor. 1 of FX-140 had warning light on at the boat ramp when engine start.
It problem was over heat sensor been corrode and damaged. This is cause of short circuit inside of sensor and ECU pick up error. In short motor wasn't over heat  just sensor's problem.
When you ride jet ski and if any warning sys on which light on or beeping, stop engine and better to tow ski slowly and call to machanic ASAP.

Service VX110

How was your Easter holiday?

My first job of after Easter was Service Yamaha VX110.
This model has common problem which water get into spark plug room from top seal rubber and get rust ignition coil. This ski coils been damaged and replaced 20HRs ago then I put and seal by Sika-flex, so now much better no water get into inside.
This igniton coil is built into spark plug cap. RH side pic is damaged one and LH side pic is seal by Sika-flex.

One of important check Air filter condition when service. This skis air filter is locating at front of engine. Yamaha genuine air filter is normally light yellow but if color change to gray or oily that need to replace.

Carby service 3

Carby job done today. It take so much time to this job. Dismantle, cleaning, fixed jammed acc pump nozzles, fixed snap screws, assembly parts and pressure test.

Carby service 2

Finish job 10pm again,,,,,,

Carby job today too, cleaned these horrible condition of carby.

Carby service is not easy job mate!

Happy Easter!